Surface & Wall Mounted FO Box

• Fiber optic access point for users’outlet or consolidation point
• STD, SCD or LCQ adapters can be mixed in the same box
• Easy ID with label holders on top cover, numbers and icons
• Accepts tight buffered fibers only, singlemode or multimode
• Integrated routing management hooks for bending radius protection

• Suitable for outdoor connections such as video security networks
• Protects the connections from dust or water ingress
• Delivered unloaded and ready to receive duplex SC or Quad LC
• Interconnects tight buffered, loose or steel tape armoured cable
• Easy ID with sticker inside top cover and transparent lid

• Suitable for outdoor connections such as video security networks.
• Protects the connections from dust or water ingress.
• Delivered unloaded; receives simplex ST or SC or duplex LC
• Interconnects tight buffered, loose, pre-terminated or STA
• Removable splice tray with 2 sides, up with adapters, down splice

Metal FO Box 4 LGX

• Metal wall box for 4 LGX module adapter plates
• Receives up to 96 fibers, SC, LC MM or SM for indoor applications
• Multiple cable entry : 4 x through glands on top, 4 on bottom
• Can be used as a demarcation point or a riser sub-distribution unit
• Delivered unloaded; receives simplex or duplex SC LC and quad LC.

• 45×45 faceplate for FTTD MM or SM indoor applications
• Receives 8 fo on 2 x LC quad or 4 fo on 2 x SC duplex adapters
• Also suitable for 2 x ST or FC duplex adapters
• Can be mounted into a duct or an outlet with a back box wallplate
• Holding system authorize horizontal or vertical mounting on a pole

Vertical Modular Users’ Outlet

• Fiber or mixed RJ45/ fiber outlet with 2 ports
• Suitable for 4 x tight buffered cables
• 4 x Splice holders also included for pigtail connections
• Two label ports on top cover for a smooth identification per port.
• The adapters’ orientation is angled to respect the bending radius.

End Users’ Outlet For FTTH

• The 48FTTH is a users’ outlet for FTTH applications
• 4 fibers between drops or indoor subscriber cable and patchcord
• Can be wall flush mounted on a 35 mm DIN rail
• Allows fiber storage on 2 independent levels for bare and tubed fiber
• Allows the use of heatshrinks or mechanical splice